We carry out various services from annual maintenance, moving, and re-siting, to conversions and refurbishment.  We have a large established servicing round covering most of Yorkshire.

Gas Safe recommend that all gas appliances be serviced at least once a year.  A gas service is predominately a safety check to ensure that the appliance is running safely and efficiently. 

 

With the oil Aga, Aga themselves recommend that the Aga be serviced every six months.  This can be dependent if the Aga is run continuously or if the Aga is switched off during the summer.  (If the Aga is switched off it will not carbon up as quickly).  An oil Aga should never be left running on a low setting as this prematurely carbons up the burner. We generally find that an annual service is sufficient. 

We line chimneys with 4" flexi flue liner.  The 4" gives a better draw to the Aga Cooker.  It is important to line the flue as this is the method in which the burners' products of combustion are conveyed to the outside atmosphere, as well as giving the Aga a stable flue draught.  It is mandatory that all gas flue appliances must have a liner fitted.  With the oil Aga it is not mandatory to fit a flue liner, but it is good practice to have one fitted for the same reasons as mentioned above.

See our oil conversion page for details

See our gas conversion page for details

As opposed to purchasing a reconditioned Aga Cooker we can refurbish your existing Aga. This can only really be priced correctly with direct contact with myself or Sue and a possible site visit to be carried out, as there are many elements to this work which can alter the cost dramatically i.e. changing the top and lids can have a dramatic effect on the look of the Aga and sometimes this is all that is needed  to transform the Aga from looking old and worn out.  The exchanging of the top and lids can usually be carried out with very little disruption.... On the day we would arrive with replacements and carry out an immediate exchange and leave the Aga ready for use.

Alternatively the Aga may need fully re-enameling if a change of colour is required or the Aga is looking worn and chipped. In some cases we can carry out a direct exchange, or if preferred the Aga can be dismantled and the front and lid enamel parts be shipped to our Enamellers.

Towel rails or chrome domes if they become tarnished can be replaced with new.

Black vitreous pipe can be exchanged.

On many occasions our customers require their Aga to be moved either internally or to another premises.

Pricing of this is dependent on different aspects such as, distance to travel and time between dismantle and reinstallation i.e. can the Aga be moved and reinstalled on the same day thereby negating the need for a second visit. Site preparation work which may be required to be carried out, again the pricing of this work would depend on how much preparation would be required i.e. resiting the fuel line, flue work etc. A site visit would need to be carried out.